To continue to toot your flute and play your pic, don't fail to follow the instructions below
| description | procedure | frequency |
| Clean bore | Use a "cat-tail" swab and clean and dry the bore of each piece of the flute. | after each use |
| Remove fingerprints | Use a dry, untreated cloth (handkerchief or such) to wipe fingerprints from the keys and body. This helps prevent staining and tarnishing. | after each use |
| Dusting | Use a small, soft paint brush to remove dust and dirt from under keys. As you brush, blow the loosened material away. See Warnings | monthly |
| Oil mechanisms | Use a straight pin, dipped in key oil, applied to the joint between each key and post and between keys. See Warnings | monthly |
| Clean head joint | Swish your head joint in cool, soapy water, rinse and let dry. If you have an extra "cat-tail" swab, your can use it to scrub the bore of the head joint, but the swab will take a while to dry, so use it only for this procedure and get another for the daily wipe and dry procedure above. | monthly |
IF IN DOUBT, DON'T!!
CALL CHARLIE AT 800-264-7228 OR EMAIL
